PUBLICATIONS

(Mehmet Serif Kavsaoglu)

 

INTERNATIONAL JOURNALS:

 

1.   KAVSAOGLU M., SCHETZ J. A., "Effects of Swirl and High Turbulence on a Jet in a Crossflow", Journal of Aircraft, vol. 26, no. 6, June 1989.

 

2.   KAVSAOGLU M., SCHETZ J. A., JAKUBOWSKI A. K., "Rectangular Jets in a Crossflow", Journal of Aircraft, vol. 26, no. 9, September 1989.

 

3.   KAVSAOGLU M. S., KAYNAK U., and VAN DALSEM, W. R., "Three Dimensional Application of the Johnson King Turbulence Model For a Boundary Layer Direct Method", Computers and Fluids, vol. 19, No. 3/4, pp. 363-376, 1991.

 

4.      YILMAZ E., KAVSAOGLU M. S., “Euler Solution of Axisymmetric Jets in Supersonic External Flow”, Journal of Spacecraft and Rockets, Vol. 35, No. 1, January-February 1998.

 

5.      DURMUS G., KAVSAOGLU M. S., “Marching Distance Functions For Smooth Control of Hyperbolic Grids”, AIAA Journal, vol 38, No: 10, October 2000.

 

6.      YILMAZ E., KAVSAOGLU M. S., AKAY H. U., AKMANDOR I. S., “Cell-Vertex Based Parallel and Adaptive Explicit 3D Flow Solution on Unstructured Grids”, International Journal of Computational Fluid Dynamics (IJCFD), Volume: 14, Issue: 4, pp. 271-286, July 2001.

 

7.      GOGUS Y. A., ÇAMDALI U., KAVSAOGLU M. S., “Exergy Balance of a General System with Variation of Environmental Conditions and Some Applications”, ENERGY (Elsevier), volume: 27, no: 7, July 2002.

 

8.      OKSUZ O., AKMANDOR I. S., KAVSAOGLU M. S., “Aerodynamic Optimization of Turbomachinery Cascades Using Euler/Boundary-Layer Coupled Genetic Algorithms”, AIAA Journal of Propulsion and Power, Vol. 18, No. 3, May-June 2002.

 

EDITOR OF A BOOK:

Title: Verification and Validation Data for Computational Unsteady Aerodynamics

No: RTO Technical Report No: 26

Editors: Ruiz-Calavera, Huang, Kavsaoglu, Guillemot, Naudin, Galbraight, Henshaw, Kaynes, Loser, Tsangaris, Pagano, Geurts, Bennett, Fox, Huttsell

Publisher: Research and Technology Organization (RTO) of NATO, France.

ISBN: 92-837-1048-7

Pages: 554

Date of Publication: October 2000

 

 

 

INTERNATIONAL CONFERENCE AND SYMPOSIUMS:

 

1.   KAVSAOGLU M., SCHETZ J. A., JAKUBOWSKI A. K., "Dual Rectangular Jets From a Flat Plate in a Crossflow", AIAA Paper 86-0477, AIAA 24th Aerospace Sciences Meeting, January 6-9, 1986, Reno, Nevada, U.S.A.

 

2.   KAVSAOGLU M. S., KAYNAK U., and VAN DALSEM, W. R., "Three Dimensional Application of the Johnson King Turbulence Model For a Boundary Layer Direct Method", International Symposium on Computational Fluid Dynamics (ISCFD), Nagoya, Japan, August 28-31, 1989.

 

3.   KARASOY S., KAVSAOGLU M., "Unsteady Boundary Pressure Studies for Adaptive Wind Tunnel Wall Interference", Second International Conference on Adaptive Wall Wind Tunnel Research and Wall Interference Correction, July 10-14, Xian, Shaanxi, China.

 

4.   KAVSAOGLU M., AKMANDOR S., ÇIRAY S., FUJII K., "Navier-Stokes Simulation of Two and Three Dimensional Jets in Crossflow", AIAA Paper 91-1743, AIAA 22nd Fluid Dynamics, Plasmadynamics, and Lasers Conference, June 24-24, Honolulu, Hawaii, U.S.A.

 

5.   KAVSAOGLU M., AKMANDOR S., ÇIRAY S., FUJII K., "Navier-Stokes Simulation of Two and Three Dimensional Jets in Crossflow, Effects of Grid and Boundary Conditions", AGARD Fluid Dynamics Panel Symposium on Computational and Experimental Assessment of Jets in Cross Flow, 19-22 April 1993, Winchester, United Kingdom (in AGARD CP-534).

 

6.   YAGCI H., KAVSAOGLU M., "Navier Stokes Analysis of a Swirling Jet in a Crossflow", AGARD Fluid Dynamics Panel Symposium on Computational and Experimental Assessment of Jets in Cross Flow, 19-22 April 1993, Winchester, United Kingdom (in AGARD CP-534).

 

7.      LAÇIN F., KAVSAOGLU M., "Navier Stokes Analysis of  Low Aspect Ratio Rectangular Flat Wings in Compressible Flow", ICAS-94-10.3.3, 19th Congress of the International Council of the Aeronautical Sciences and AIAA Aircraft Systems Conference, September 18-23, Anaheim, CA, U.S.A.,

 

8.      SEN T.S., KORKEM B., TEMEL B., KAVSAOGLU M.S., “Analysis of Complex Aerodynamic Configurations with a Zonal Navier Stokes Solver”, ICAS-96-7.10.1, 20th  Congress  of the International Council of the Aeronautical Sciences, September 8-13, 1996, Sorrento, Napoli, Italy.

 

9.    YILMAZ E., KAVSAOGLU M. S., “Numerical Solution of Axisymmetric Jet

       Plume Coupled with External Freestream”, ICAS-96-7.10.4 20th Congress of the

       International Council of the Aeronautical Sciences, September 8-13, 1996,

       Sorrento, Napoli, Italy.

 

10.  ONEN C., YAVUZ I., KAVSAOGLU M. S., “Calculation of Aerodynamic

       Coefficients of Missile Like Geometries by Viscous/Inviscid Coupling”,

       ICAS-96-7.9.2, 20th Congress of the International Council of the Aeronautical

       Sciences, September 8-13, 1996, Sorrento, Napoli, Italy.

 

11.ERTUNÇ O., KAVSAOGLU M. S., AKAY H.U., AÇIKMESE A. B., “Parallel Euler Solutions For a Supercritical Airfoil in Unsteady Compressible     Flow”,UNCONF’97, First International Conference on Unconventional Flight, October 13-15, 1997, Technical University of Budapest, Department of Aircraft and Ships, Budapest, Hungary.

 

12.KAVSAOGLU M. S., “Aeronautical Engineering Design Course at Middle East Technical University”, Third European Workshop on Aircraft Design Education, Bristol, UK, 11-12 May 1998.

 

13.DURMUS G., KAVSAOGLU M. S., “Control of Hyperbolic Grids”, AIA `98 – Proceedings of the 2nd Ankara International Aerospace Conference, 9-11 September 1998, Middle East Technical University, Ankara, Turkey, pp. 120-124.

 

14.DOGRUSOZ S., KAVSAOGLU M. S., “Euler Solution of a Hypersonic Compression Corner Flow”, AIA `98 – Proceedings of the 2nd Ankara International Aerospace Conference, 9-11 September 1998, Middle East Technical University, Ankara, Turkey, pp. 419-425.

 

15.YILMAZ E. KAVSAOGLU M. S., “Parallel Adaptive Flow Solution on Unstructured Meshes”,  Paralel CFD Workshop – Experiences in Implementation, June 16-18, 1999 Istanbul Technical University, Faculty of Aeronautics and Astronautics, Istanbul, Turkey.

 

16.OKAN A., TEKINALP O., KAVSAOGLU M. S., ARMUTÇUOGLU O., TULUNAY E., “Flight Mechanics Analysis of a Tilt Rotor UAV”, AIAA Atmospheric Flight Mechanics Conference and Exhibit, August 9-11, 1999 / Portland, OR, USA.

 

17.ARMUTÇUOGLU O., KAVSAOGLU M. S., TEKINALP O., OKAN A., TULUNAY E., “Conceptual Design of a Tilt-Duct VTOL UAV”, 15th Bristol International UAV Systems Conference: 10-12 April 2000, Bristol, UK.

 

18.YILMAZ E., AKAY H. U., KAVSAOGLU M.S., AKMANDOR I. S., “Parallel and Adaptive 3D Flow Solution Using Unstructured Grids”, International Parallel CFD 2000 Conference, Trondheim, Norway, May 22-25, 2000.

 

Parallel Computational Fluid Dynamics – Trends and Applications, Proceedings of the Parallel CFD 2000 Conference (Trondheim, Norway, May 22-25, 2000), J. B. Jenssen et al. (Editors), 2001 Elsevier Science B.V., ISBN: 0-444-50673-X.

 

19.KAVSAOGLU M.S., TEKINALP O., TULUNAY E., OKAN A., ARMUTÇUOGLU O., “Design, Flight Mechanics and Control of a VTOL UAV”, NATO RTO-AVT (Research and Technology Organization – Applied Vehicle Technology Panel) Symposium on Unmaned Vehicles (UV) For Aerial, Ground and Naval Military Operations, 9-13 October 2000, Ankara, Turkey.   

 

20.DOGRUSOZ S., KAVSAOGLU M. S., KAYNAK U., “Numerical Solution of Hypersonic Compresion Corner Flows”, 10th AIAA/NAL-NASDA-ISAS International Space Planes and Hypersonic Systems and Technologies Conference, April 24-27, 2001, Kyoto, Japan. AIAA Paper No: 2001-1750.

 

21.OYSAL T., KAVSAOGLU M. S., “A Flight Simulation Software for Flight Mechanics Education”, AIAA Atmospheric Flight Mechanics Conference, 6-9 August 2001, Montreal, Canada. AIAA Paper No: 2001-4309.

 

22.OKAN A., TEKINALP O., KAVSAOGLU M. S., “Flight Control of a Tilt Duct VTOL UAV”, AIAA 1st Unmanned Aerospace Vehicles, Systems,Technologies, and Operations Conference, Portsmouth, Virginia    20 - 23 May 2002,  AIAA Paper No: 2002-3466

 

11.DURMUS G., KAVSAOGLU M. S., “Multi Block Navier Stokes Solutions of Low Aspect Ratio Rectangular Flat Wings in Compressible Flow”, in proceedings of the 23rd international Congress of Aeronautical Sciences, Toronto, Canada, 8-13 September, 2002.

 

12.TARHAN E., KAVSAOGLU M. S., OKTAY E., “Solution of Airfoil-Flap Configurations By Using Chimera Grid System”, in proceedings of the 23rd international Congress of Aeronautical Sciences, Toronto, Canada, 8-13 September, 2002.

 

 

THESES, REPORTS AND LOCAL PUBLICATIONS:

 

1.   Istanbul Technical University, Faculty of Mechanical Engineering, Aircraft Elements and Engines Section Report:

      "Subsonic Wind Tunnels", Prof. Dr. M. Zeki ERIM, Y. Muh. Veysel ATLI, Muh. Mehmet KAVSAOGLU, 1979 (in Turkish).

 

2.   MSc Thesis:

      "Investigation of the Flow Around Axisymmetric Bodies",

      Supervisor: Prof. Dr. M. Zeki ERIM.

      Istanbul Technical University, Faculty of Mechanical Engineering, MSc Thesis  No: 89, January 1981 (in Turkish).

 

3.   Von Karman Institute Project Report:

      "Flow Around Low Aspect Ratio Rectangular Flat Plates Including Compressibility",

      Supervisor: Dr. J. F. WENDT

      VKI PR 1982-15, June 1982.

 

4.   Ph.D. Dissertation:

      "Jets in a Crossflow Including the Effects of Dual Arrangements, Angle, Shape, Swirl and High Turbulence",

      Chairman of the Advisory Committee: Dr. J. A. SCHETZ

      Virginia Polytechnic Institute and State University, Department of Aerospace and Ocean Engineering, December 1986, Blacksburg, Virginia, U.S.A.

 

5.   ERIM M. Zeki, ATLI Veysel, KAVSAOGLU Mehmet S., "Construction of a Low Speed Subsonic Wind Tunnel and Determination of the Velocity Profile in the Test Section", TUBITAK VII. th Science Congress, Mechanical Engineering Section, September 29  -  October 3, 1980, Kusadasi, Turkey (in Turkish).

 

6.   TOKSOY S., KAVSAOGLU M., "The Design and Manufacturing of a Wind Tunnel Balance", Muhendis ve Makina (Engineer and Machine; a monthly journal of the Turkish Chamber of Mechanical Engineers), No: 379, August 1991 (in Turkish).

 

7.   ÇIRAY C., KAVSAOGLU M., "Final Report of TAI X 1 Project", Middle East Technical University, Aeronautical Engineering Department, April 1991, Ankara, O.D.T.U. Doner Sermaye Proje No: 90-03-13-05.

 

8.   KAVSAOGLU M. S., "EUROFLAG Prefeasibility Studies for Logistic 2 (20 tons to 3000 NM) and for Mach Numbers of 0.72, 0.76, and 0.80", CASA Aircraft Company Preliminary Design Department Technical Report No: AEG-DP-FLG-NT-92024, Checked by: Juan Carlos GARCIA ROJO, Approved by: Jose Luis LOPEZ DIEZ, October 1992, Madrid, Spain, (internal use of  CASA only).

 

9.   YILMAZ D., KAVSAOGLU M. S., "Conceptual Design Analysis of C-216", CASA Aircraft Company Preliminary Design Department Technical Report No: AEG-DP-C3M-NT-92025, Checked by: P. CESAR, J. C. GARCIA, Approved by: J. L. LOPEZ DIEZ, November 1992, Madrid, Spain (also Turkish Undersecretary of Defence Industries, Light Transport Aircraft Project, Research and Development Program report).

 

10. YILMAZ D., KAVSAOGLU M. S., "Preliminary Design of a 68 Passenger Medium Range Passenger Aircraft", VIII. th National Mechanics Congress, September 6-10, 1993 Antalya, Turkey (in Turkish).

 

11. YILMAZ Erdal, KAVSAOGLU Mehmet S., "Axially Symmetric Euler Solution of the Missile Flowfields", T.C. Hv. K. K. Hava Harp Okulu Komutanligi I. Havacilik Sempozyumu, 9-10 Haziran 1994, Hava Harp Okulu, Yesilyurt, Istanbul (presented at the Air Force Cadet School, First Aeronautics Symposium, June 9-10, 1994, Istanbul, Turkey, in Turkish).

 

12. SEN T. Serkan, TEMEL Beytullah, KAVSAOGLU Mehmet S., "Application of the Navier Stokes Equations to Internal and External Flow Problems", T.C. Hv. K. K. Hava Harp Okulu Komutanligi I. Havacilik Sempozyumu, 9-10 Haziran 1994, Hava Harp Okulu, Yesilyurt, Istanbul (presented at the Air Force Cadet School, First Aeronautics Symposium, June 9-10, 1994, Istanbul, Turkey, in Turkish).

 

13. KAVSAOGLU Mehmet Serif, "How an Aircraft Fly?", Bilim ve Teknik, Sayi: 321, Agustos 1994 (in "Science and Technology", a monthly journal of the Scientific and Technical Research Council of  Turkey, No:321, August 1994, in Turkish).

 

14. ÇAKMAK M. A., YILMAZ A. O., KAVSAOGLU M. S., "Design of Best Propeller for Wind Generator", 1st National Wind Energy Symposium, June 1-2 1995, Istanbul, Turkey (in Turkish). Published in: Kaynak Elektrik, No: 87 (1985/4)    

 

15. YILMAZ Erdal, DILAVER Serdar, YARAN Ahmet, KAVSAOGLU Mehmet  Serif, "Euler Solution of  Compressible Flowfields Around Cylinder and Sphere by Using Solution Adaptive Unstructured Meshes", IX. National Mechanics Congress, 4-8 September 1995, Urgup, Turkey (in Turkish).

 

16. YILMAZ Erdal, KAVSAOGLU Mehmet Serif, "Viscous Analysis of the Flowfield Around a Missile Body with Base Jet", IX. National Mechanics Congress, 4-8 September 1995, Urgup, Turkey (in Turkish).

 

17. TELÇEKER Necati, YILMAZ Adil Onur, ÇAKMAK Murat Arda, YILMAZ Erdal, KAVSAOGLU Mehmet Serif, "Re-Activation of the Ankara Wind Tunnel", IX. National Mechanics Congress, 4-8 September 1995, Urgup, Turkey (in Turkish).

 

18. SEN Turgut Serkan, TEMEL Beytullah, KAVSAOGLU Mehmet Serif, "Thin Layer Navier Stokes Solution of the Flowfields Around Various Geometries by using Multi-Block Grids", IX. National Mechanics Congress, 4-8 September 1995, Urgup, Turkey (in Turkish).

 

19. YAVUZ Ibrahim, KAVSAOGLU Mehmet Serif, "Integral Method Solution of the Laminar Heat Transfer Problem", IX. National Mechanics Congress, 4-8 September 1995, Urgup, Turkey (in Turkish).

 

20. TARHAN Erhan, AYDIN Ahmet, KAVSAOGLU Mehmet Serif, GOGUS Yalçin, "Numerical Solution of Three Dimensional Droplet Combustion in a Laminar, Incompressible Medium", 10 th National Heat Science and Technique Congress with International Participation, 6-8 September 1995, Gazi University, Faculty of  Engineering and Architecture, Ankara, Turkey.

 

21. KORKEM B., KAVSAOGLU M. S., “Design and Navier Stokes Analysis of

      Eppler Airfoils”, Kayseri 1st Aeronautical Symposium, May 13-16 1996, Erciyes  

      University, Civil Aviation School, Sabanci Cultural Complex, Kayseri, Turkey (in

      Turkish).

           

22.  ÇAKMAK M. A., KAVSAOGLU M. S., “Re-Activation Works of Ankara Wind

      Tunnel  (ART)”, Kayseri 1st Aeronautical Symposium, May 13-16 1996, Erciyes  

      University, Civil Aviation School, Sabanci Cultural Complex, Kayseri, Turkey (in

      Turkish).

 

23.  BEKTAS I., KAVSAOGLU M. S., “Analysis of Reverse Flow in Rocket

       Launchers”, Kayseri 1st Aeronautical Symposium, May 13-16 1996, Erciyes  

       University, Civil Aviation School, Sabanci Cultural Complex, Kayseri, Turkey      

      (in Turkish).

 

24. BEKTAS I, KAVSAOGLU M. S., “Aerodynamic Heating Analysis of Missiles”, ULIBTK’97, 11. National Heat Science and Technique Congress with International Participation, 17-19 September 1997, Trakya University, Faculty of Engineering and Architecture, 22030 Edirne, Turkey.